IN-LINE 4 175 hp
The F175 is 30 pounds lighter than its closest 1.7-liter competitor, but it still delivers breathtaking acceleration, midrange punch and impressively smooth performance. It’s compatible with either mechanical controls or digital controls.
- Compatible with mechanical controls or digital Command Link Plus® or Helm Master® EX controls
- Only 483 pounds (20” shaft model)
- Available in 20” or 25” shafts
- A 50-amp alternator to power an array of onboard electronics
Spec. Sheet
| Engine Type | Inline 4 |
|---|---|
| Displacement | 2.8L |
| Bore x Stroke | 96 x 96.2mm (3.78 x 3.79in) |
| Prop Shaft Horsepower | 175 hp @ 5500 rpm |
| Full Throttle RPM Range | 5000 ~ 6000 rpm |
| Alternator Output at W.O.T. | 50 Amp |
| Compression Ratio | 10.3:1 |
| Fuel Induction System | EFI |
| Weight † | 219 kg (483 lbs) – 221 kg (487 lbs) |
| Recommended Fuel | Octane 87 |
| Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
| Recommended Fuel Filtration | Yamaha 10 Micron Fuel/Water Separating Filter (external) |
| C.A.R.B. Rating | 3-Star |
| Exhaust | Through Propeller |
| Intake | 16 |
| Ignition | TCI Microcomputer |
| Spark Plug | NGK-LFR6A-11 |
| Alternator Output | 50 Amp |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Engine Oil Capacity | 4.5L/4.3L |
| Recommended Cooling | Thermostatic Control |
| Ethanol Blend Limit | 10% Maximum |
| Gear Ratio | 1.86:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | 20″ – 25″ |
| Degree of Tilt | 70° |
| Degree of Trim | -4° through +16° |
| Dry Weight | 20″ shaft / 219 kg (483 lb), 25″ shaft 220 kg (485 lb) |
| Mounting Centers | 26″ |
| Steering Angle (maximum) | 32° from center, either direction |